If you ordered a hazmat item. A hazard fee by our shipping company will be added to shipping total. this only applys to items that says in the description that the item that you are ordering has a hazmat fee.
No Clearance Changes Needed. Excellent For Rod and Main Bearings
APPLICATION: Sandblast all parts with 120 grit aluminum oxide. DO NOT USE
GLASSBEAD. Clean metal using convential cleaning methods, with acetone, lacquer
thinner or other similar non-petroleum based solvent.When the surface is clean
and dry, apply a thin even layer of coating using an airbrush, detail touch-up
gun or other spray equipment that allows for application of a thin film of
approximately .001" to .0015". Avoid excessive build-up of material as this can
lead to loss of adhesion. DO NOT APPLY A SECOND COAT AFTER THE COATING DRIES.
Allow to air dry and Cure at 300f for 1 hour. CLEAN UP: Clean equipment
withwater Non Flammable READ DATA SHEET AND M.S.D.S. BEFORE USING
